Modification of Electro - Pneumatic Elevator System depending on the air pressure and flow rate determinations

Authors

  • Hatam Kareem Kadhom Electromechanical Engineering Dep. / University of Technology / Baghdad
  • Fikrat Abdul-Kareem Fattah Electromechanical Engineering Dep. / University of Technology / Baghdad

DOI:

https://doi.org/10.31185/ejuow.Vol6.Iss2.92

Keywords:

Pneumatic, electro-pneumatic, Elevator

Abstract

Abstract-The paper presents Determination of pressures and flow for an Electro-pneumatic elevator system controlled by PLC to achieve the requirements modifications for improve presence   model. The controller used for the prototype was implemented in Ladder logic on a PLC. The PLC used for this work is (LS\GLOFA-G7M-DR20A) series with (8) input and (12) output and the expansion modal (G7E-DR10A) series with (6) input and (4) output and become (14) input and (16) output.   The PLC is programmed with Ladder diagram. This develop of a new elevator system is expected to be effective at ideal design in low-rise internal buildings when this elevator type are used

References

Additional Files

Published

2018-08-30

Issue

Vol. 6 No. 2 (2018)

Section

Electrical Engineering

How to Cite

Kadhom, H. K., & Fattah, F. A.-K. (2018). Modification of Electro - Pneumatic Elevator System depending on the air pressure and flow rate determinations. Wasit Journal of Engineering Sciences, 6(2), 56-65. https://doi.org/10.31185/ejuow.Vol6.Iss2.92