Experimental study of natural heat transfer from finned heat exchanger fixed in variable shape of duct
Experimental study of natural heat transfer from finned heat exchanger fixed in variable shape of duct
DOI:
https://doi.org/10.31185/ejuow.Vol11.Iss1.357Keywords:
Natural convection, Finned heat exchanger, Variable converge duct, Rectangle fins.Abstract
The work was an experimental study of natural heat transfer from heated cylinders fixed in variable shape air duct, made from Pyrex glass. Two finned cylinders made from mild iron, outer diameter (12) mm, inner diameter (10) mm, rectangle fins dimensions (70*40) mm. The angle of two walls from the duct was changed to five angles α:(0°,3°,5°,10°,15°) with vertical to make converge shape. The cylinders were fixed inside the duct at top, centre and bottom. The cylinders were heated by supply variable power of constant heat flux (88,177,390 and 680) W/m2. The study was done with Rayleigh numbers (15x103 to 14x104). The heat was carried by free convection by atmosphere air. The results of experimental found for top location, the value of Nusselt number increased by 7.8% at ԛ•= 88 W/ m2 when increase the value of angle from 0° to 5°, and increased by 20% at ԛ•= 680 W/ m2 when increased the value of angle from 0° to 15°.For centre location, the value of Nusselt number increased by 25 % at ԛ•= 88 W/ m2 when increase the value of angle from 0° to 3°, and increase by 21 % at ԛ•= 680 W/ m2 when increase the value of angle from 0° to 10°.For bottom location, the value of Nusselt number increased by 35 % at ԛ•= 88 W/ m2 when increase the value of angle from 0° to 3°,and increased by 30 % at ԛ•= 680 W/ m2 when increasing the value of angle from 0° to 10°.The best location for the heat exchanger was at the bottom, and the best angle was 15°.
References
Y. Cengel and T. M. Heat, “A practical approach,” Second edi, 2003.
H.-T. Chen and J.-C. Chou, “Investigation of natural-convection heat transfer coefficient on a vertical square fin of finned-tube heat exchangers,” Int. J. Heat Mass Transf., Vol. 49, No. 17–18, pp. 3034–3044, 2006. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2006.02.009
A. Kar, “CFD analysis for natural convection of a vertical tube with various fin configurations.” 2012.
Y. G. Park, M. Y. Ha, C. Choi, and J. Park, “Natural convection in a square enclosure with two inner circular cylinders positioned at different vertical locations,” Int. J. Heat Mass Transf., Vol. 77, pp. 501–518, 2014. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2014.05.041
O. M. Omar, “Numerical investigation of Prandtl number effects on the natural convection heat transfer from circular cylinder in an enclosed enclosure,” Sci. J. Univ. Zakho, Vol. 2, No. 2, pp. 358–374, 2014. DOI: https://doi.org/10.25271/2014.2.2.220
J. R. Senapati, S. K. Dash, and S. Roy, “Numerical investigation of natural convection heat transfer from vertical cylinder with annular fins,” Int. J. Therm. Sci., Vol. 111, pp. 146–159, 2017. DOI: https://doi.org/10.1016/j.ijthermalsci.2016.08.019
S. Narayan, A. K. Singh, and A. Srivastava, “Interferometric study of natural convection heat transfer phenomena around array of heated cylinders,” Int. J. Heat Mass Transf., Vol. 109, pp. 278–292, 2017. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2017.01.106
G. S. Mun, Y. G. Park, H. S. Yoon, M. Kim, and M. Y. Ha, “Natural convection in a cold enclosure with four hot inner cylinders based on diamond arrays (Part-I: Effect of horizontal and vertical equal distance of inner cylinders),” Int. J. Heat Mass Transf., Vol. 111, pp. 755–770, 2017. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2017.04.004
H. K. Abdullah and G. H. Alwan, “The effect of inclination angle of finned cylinders upon free convection heat transfer,” AIP Conf. Proc., Vol. 2235, No. May, 2020, Doi: 10.1063/5.0009080. DOI: https://doi.org/10.1063/5.0009080
H. K. Abdullah and M. A. Hassan, “Experimental Study of Natural Heat Transfer from Two Horizontal Finned Cylinders Fixed in Converge Duct,” Vol. 41, No. 4, pp. 685–693, 2022.
Downloads
Published
Issue
Section
License
Copyright (c) 2023 Wasit Journal of Engineering Sciences

This work is licensed under a Creative Commons Attribution 4.0 International License.

