Numerical analysis of the impact of fin design and solar radiation on the cooling performance of a power transformer

fatima almosawy; Hadi Basher

doi:10.31185/ejuow.Vol11.Iss2.445

Authors

fatima almosawy student
Hadi Basher

DOI:

https://doi.org/10.31185/ejuow.Vol11.Iss2.445

Keywords:

heat transfer, solar radiation, power transformer, fin geometry

Abstract

In the present work, a three-dimensional model was performed to test a geometry and solar radiation effect on the cooling efficiency of a 250 kilovolt-ampere (kVA) oil-natural-air-natural (ONAN) electrical distribution transformer. Several fin shapes and other geometric aspects of the transformer were analyzed numerically (trapezoidal, wavy, and triangle fins).According to the findings, the trapezoidal fin shapes were the most effective in lowering the transformer's average surface and core temperatures, followed by the wavy fins and the triangular fins compared to the traditional transformer shape (straight fins). The study also showed that the temperature of the surface and the core of the transformer increases with increasing solar radiation, but the effect of high temperature as a result of electrical load is more influential than solar radiation. The results showed a significant convergence with previous research.

References

P. A. Córdoba, N. Silin, D. Osorio, and E. Dari,(2018). “An experimental study of natural convection in a distribution transformer slice model,” Int. J. Therm. Sci., vol. 129, pp. 94–105.

S. Anishek, R. Sony, J. J. Kumar, and P. M. Kamath,(2016). “Performance analysis and optimisation of an oil natural air natural power transformer radiator,” Procedia Technol., vol. 24, pp. 428–435.

E. Hajidavalloo and M. Mohamadianfard,(2010). “Effect of sun radiation on the thermal behavior of distribution transformer,” Appl. Therm. Eng., vol. 30, no. 10, pp. 1133–1139.

S. B. Paramane, W. Van der Veken, and A. Sharma,(2016). “A coupled internal–external flow and conjugate heat transfer simulations and experiments on radiators of a transformer,” Appl. Therm. Eng., vol. 103, pp. 961–970.

N.-C. Chereches, M. Chereches, L. Miron, and S. Hudisteanu,(2017). “Numerical study of cooling solutions inside a power transformer,” Energy Procedia, vol. 112, pp. 314–321.

M. Kim, S. M. Cho, and J.-K. Kim,(2013). “Prediction and evaluation of the cooling performance of radiators used in oil-filled power transformer applications with non-direct and direct-oil-forced flow,” Exp. Therm. Fluid Sci., vol. 44, pp. 392–397.

W. Bengang, H. Hua, L. Junshang, W. Nannan, D. Mingqiu, and J. Tianyi,(2017). “Three dimensional simulation technology research of split type cooling transformer based on finite volume method,” Energy Procedia, vol. 141, pp. 405–410.

R. B. Fdhila, J. Kranenborg, T. Laneryd, C. Olsson and Bertil Samuelsson, (2011). “Thermal modeling of power transformer radiators using a porous medium based CFD approach,” in Second International Conference on Computational Methods for Thermal Problems, Dalian, China, 2011, pp. 5–7.

J. K. Seong, M. J. Choi, S. G. Woo, B. S. Baek, and J. S. Hur,(2012). “Evaluation of the cooling capacity for oil immersed transformer radiator using numerical analysis,” in Proceedings of the Korean Society of Mechanical Engineers Autumn Conference, 2012, pp. 61–65.

T. Talu and S. D. Talu,(2011). “Modelling of thermal processes of a hydraulic cooling system for a power transformer,” Sci. Bull. Vallarta Univ. Mater. Mech., no. 6.

Ş. D. L. ŢĂLU and M. D. L. ŢĂLU,(2010). “Dimensional optimization of frontal radiators of cooling system for power transformer 630 kVA 20/0.4 kV in terms of maximum heat transfer,” UPB Sci. Bull. Ser. C, vol. 72, no. 4, pp. 249–260.

I. Pop and D. B. Ingham,(2001). Convective heat transfer: mathematical and computational modelling of viscous fluids and porous media. Elsevier.

H. Inaba, Y. Zhang, A. Horibe, and N. Haruki,(2007). “Numerical simulation of natural convection of latent heat phase-change-material microcapsulate slurry packed in a horizontal rectangular enclosure heated from below and cooled from above,” Heat mass Transf., vol. 43, no. 5, pp. 459–470.

A. A. Abduladheem and M. I. Hasan,(2019). “Using of PCM as an energy storage material to improve the cooling process in electrical transformers,” Univ. Thi-Qar J. Eng. Sci., vol. 10, no. 2.